1.25" Standard Tube Adapter Right Hand 1.5(ID) 12(TPI)
This is a weld in threaded bung for your link suspension. This one is the big guy made for the bottom of the truck, the side that's going to see the dirt firsthand. We make these a little different then the rest, the way I want them to be, they allow for most of the heim to go into the tube itself so it is supported by both the bung and the tube. Although not chromoly they are stronger when used this way. This is the right hand thread model for a 1.25" Heim Joint.
NOTE: SOLD INDIVIDUALLY
*Tips to help prevent any seized or warped threads:
- Correctly adjust welder settings and start your puddle on the tube. (Too much heat will warp the threads)
- Do not weld the tube adapter with the rod end threaded inside. (The two pieces cool at different rates and will lock them together)
- Wait until everything has completely cooled before threading your rod ends into the adapters
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
