RuffStuff Specialties: 14 Bolt Disc Brake Bracket Pair for C&C Axle

SKU: R1022-B 14 Bolt Disc Brake Bracket Pair for C&C Axle

Click image to zoom

Description
Reviews

14 Bolt Disc Brake Bracket Pair for C&C Axle

This is for converting to a standard single steel wheel minimum 15" with a maximum 4" back spacing

Here is the bracket so many of you asked us to make, it works on the Cab & Chassis 14 Bolt Axle ('73-87). This bracket uses the '75 Chevy 3/4 Ton Front rotors and calipers just like the rest of the 14 Bolt Disc Brake brackets we make, it simply has the different offset required to run on a Cab & Chassis Axle. These make the 14 bolt Disk Brake Conversion easy! They are sold in pairs and made of 3/8" plate. They are bent and do not require spacers like the ones other companies make.

After '99 all bets are off, the newer model 14 Bolt axles have a variety of patterns & offsets, use a weld on bracket for a newer 14 Bolt axle.

*NOTE* Double check stud diameter, studs should drop freely into the rotor. DO NOT press studs into the rotor. If your hub has too large of studs you will need to drill the rotors to accept them. Be sure to have minimum 5/8" lug nut thread engagement once the wheel is installed

NAPA Part numbers for '73-'87 3/4 Ton Front, 4x4, Chevy

Calipers and Rotors:

Use these brackets with our calipers found here GM Dual Bleeder Loaded Brake Caliper (ruffstuffspecialties.com)

Caliper ONLY: LH - N4674, RH - N4673 - Both of these are LATER year part numbers
OR
LH - N4597, RH - N4596 - Both of these are EARLIER year part numbers
Rotor Only - 4885677 - all years
Brake line - H86572

Write Review

Currently Viewing Reviews with a rating of 5. Click here to reset.

★★★★★ ★★★★★

5/5 Stars out of 1 Reviews

1 ★

2 ★

3 ★

4 ★

5 ★

Verified Buyer

Great product, excellent customer service!

★ ★ ★ ★ ★ 5

Travis Tichelaar (Santa Paula, CA, US) | August 3rd, 2018

I purchased a set of these C&C specific brake disc brackets, had a mix-up and was shipped the non-C&C brackets. I contacted Dan who responded immediately and was apologetic and helpful in making sure that I did order and need the C&C brackets. We sorted everything out within minutes, and he shipped out the correct brackets and a return label that day. I literally could not ask for better customer service. Thanks Dan! The brackets themselves work exactly as they need to. They're very beefy at a full 3/8" thick, and the fact that they bolt on made my job converting to disc as simple as it could be. Awesome product at a great price!

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.