3 Link Kit with 1.25" Heims

3 Link Kit with 1.25" Heims

*Does not come with DOM Tubing, DOM Tubing is available here.

NOTE: All link brackets have 9/16" holes. If the option to choose a larger bolt size is selected, the bracket holes will need to be drilled to match.

KIT INCLUDES:

• 3--RH 1.25" Heims, jams and tube adapters
• 3--LH 1.25" Heims, jams and tube adapters
• 12--High misalignment spacers
• 2-- 7/8 heims for panhard with misalignment
• 2--Panhard brackets of your choice
• 2--Lower axle 0 degree link brackets
• 2--Chassis link brackets
• 1--Upper axle link tower
• 1--Adjustable upper link or 3 leg link (The 3 leg link fits better on a narrow frame).
• 1 - Bolt kit

We have everything here to create a 3 link suspension, front or rear, and not low end stuff just to be cheap either! The kit is wrapped around 6 of our 1.25" Heat Treated Chromoly Heims with High Misalignment, Zinc Plated Jam nuts, and 1.5" Tube ID Weld Bungs and another set of the same in 7/8" for the Panhard. We add our Chassis Link Brackets, a 10 degree Adjustable Axle Link Tower, a 10 degree Frame bracket for the 3rd link, the Axle Lower Link brackets. We finish the Kit off with the Panhard setup, an Axle Offset panhard Bracket & the Frame panhard (inside or outside).

We now make adding the DOM tubing for your links an option, but remember that 2" x .25" wall DOM weighs - 5lbs a foot so check your prices locally before you decide to add the Link & Panhard Material(DOM)!

If you need to change anything give us a call and we can mix & match til its right for you!