7/8" x 18TPI Right Hand Tube Adapter 1" ID HEX

SKU: R1071 7/8" x 18TPI Right Hand Tube Adapter 1" ID HEX

Click image to zoom

Description
Reviews

7/8" x 18TPI Right Hand Tube Adapter 1" ID HEX

This is a Hex Head Tie Rod End weld bung/tube adapter. In a TRE adjustability is the key to easy adjustment so we provide this style with all our steering kits. Here we offer them individually if you are making your own Drag Link or Tie Rod.

They are more expensive to make than our standard weld bungs but make setting up your steering that much easier.

*Tips to help prevent any seized or warped threads.

Correctly adjust welder settings. (Too much heat can warp the threads)
Not welding the tube adapter with the rod end threaded inside. (Getting the rod end too hot can damage the liner)
Be careful to not keep too much heat on the tube adapter when welding inside of D.O.M.

Write Review

Currently Viewing Reviews with a rating of 5. Click here to reset.

★★★★★ ★★★★★

5/5 Stars out of 5 Reviews

1 ★

2 ★

3 ★

4 ★

5 ★

Verified Buyer

1 ton Upgrade

★ ★ ★ ★ ★ 5

Jeff Vande Guchte (Shepherd, MI, US) | June 2nd, 2019

I got a pair of them, 1 LH and 1 RH for a 1 ton over the knuckle set-up for my YJ D44 front. They fit in the tube great with plenty of material left for welding and strength. They have over an inch outside the tube so they are easy to grab onto with a wrench for tightening or loosening. These are my new go to for 1 ton steering.

Verified Buyer

Worked Great

★ ★ ★ ★ ★ 5

Steven Stock (Prescott, AZ, US) | August 26th, 2018

I used this with welded tubing, not the DOM sold by RuffStuff because it is what I had. I do not recommend this as the fit is not great and this makes it harder to align when welding. I had to start with tubing which was looser, tack the adapter in place and then hammer it straight before welding it up. Do yourself a favor and buy the DOM. The seam inside welded tubing makes working with the welded stuff a real pain. The adapter welded easily and I had no problem getting good weld penetration.

Verified Buyer

Perfect fit.

★ ★ ★ ★ ★ 5

Hip2besquare (Joppa, MD, US) | March 29th, 2017

This tube adapter along with the DOM tubing Ruff Stuff sells was exactly what I needed. The adapter fit perfectly inside the tube, no slop so I was not worried it being straight. I was a little worried about overheating the threads during welding, but everything turned out fine.

Verified Buyer

Life is so Easy

★ ★ ★ ★ ★ 5

Edward Shimer (Hainesport, NJ, US) | January 15th, 2016

Thanks for a great product going to make my conversion so easy

Verified Buyer

Make OTK easy

★ ★ ★ ★ ★ 5

Patrick Llewellyn (Surfside Beach, TX, US) | October 21st, 2012

Makes making steering arms easy, fast shipping, will use again when I go over to tons

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.