9.75" Shock Tower, 2" Deep - Pair

9.75" Shock Tower

2.5" diameter coil over shock towers, most vehicles will fit a 10 - 12" coilover with these... and no, they are not hoops! These are 9 3/4" above the frame at the shock mounting position center, they are 15 degrees offset from the frame and are 2" deep when measured from the outside face of the frame towards the engine compartment. All of our shock towers are 1/4" thick and come in pairs, complete with Grade 8 Nuts and Bolts.

Details:

• 1/4" thick
• 1/2" bolt hole
• Hardware included
• Unwelded

Note

• Sold Unwelded