Ford 8.8" 3/8" Differential Cover

SKU: R1272 Ford 8.8" Differential Cover

Click image to zoom

Description
Reviews

Ford 8.8" 3/8" Differential Cover

This is our basic differential cover. The Ford 8.8 axle is easy to find in Ford Explorers, F150's, 4.0 liter Rangers, & a ton of Ford cars too.

FULLY BACKED BY A LIFETIME WARRANTY
Ring and the Cover are 3/8" thick
Plate steel cover bent 8 ways
Machined absolutely flat for a perfect fit
All seams welded inside and out
Bolt kit comes with (5/16) 12 point bolts with washers

The differential cover is a 1 piece 3/8" (.375") plate steel cap bent 8 ways then welded to a 1/2" ring. The fill plug is a generous 3/4" ID for easy fill and oil level check, it is located 1" above where the factory "should" have put it in a stock vehicle to account for pinion adjustment. One of the reasons it is so hard to hurt is that we manufacture it out of A50 Plate Steel, that's 50,000 PSI Tensile strength. After welding, the mounting surface is machined absolutely flat for a perfect fit!

This is a fully welded Ford 8.8 Diff Cover, welded inside and out and it will include a Fill Plug unlike many of the stock 8.8's.

Write Review

Currently Viewing Reviews with a rating of 5. Click here to reset.

★★★★★ ★★★★★

5/5 Stars out of 17 Reviews

1 ★

2 ★

3 ★

4 ★

5 ★

Pages 1 2 3 4

Incredible Diff Cover

★ ★ ★ ★ ★ 5

Ji Theriot (FL) | March 26th, 2023

This thing is impressive! It's thick, heavy and fit perfect. Be Aware!!!: This cover will require more gear oil than the factory cover. I think I ended up needing 4qts of oil when it was all said and done to ensure oil was getting to the wheel bearings.

Owner of Jeeps

★ ★ ★ ★ ★ 5

Edgar Lopez (TX) | June 20th, 2022

Beefy unit looks great and will survive your wife driving over a large boulder. Only thing i will advise is not to use the inspection plug to fill the axle. I was about 2 quarts low when i checked it through the factory fill hole. Other than that its a good quality unit for a great price.

Impressive

★ ★ ★ ★ ★ 5

Nathan Holland | March 8th, 2022

I just received my cover I ordered from you guys and felt the need to contact you. All I can say is wow! I really wasn��t expecting it to be like this. Very impressive fabrication. Excellent welds. Perfect machining. I��ve already made a post about it on my truck page. Thank you guys for building an excellent product. Especially the brake work that had to be done to get geometry correct. I��ll be using it on a race truck but I can see why guys would love these for off-road use. You��ll never break that thing! You��ll snap the tubes off before you dent cover! Thank you again for such an impressive piece

Solid

★ ★ ★ ★ ★ 5

Jason (Oregon) | December 28th, 2021

Not first time I’ve done business with ruff stuff but like always satisfied with what I’ve purchased. This diff cover is built solid seen many others and got to say if your wanting something perfect it be this thing. Plus it’s made right here in the USA.

Verified Buyer

TALK ABOUT SOLID

★ ★ ★ ★ ★ 5

David Bear (Coudersport, PA, US) | April 29th, 2020

I have a few of these ruff stuff covers and its all I will run on my rigs. They fit better than the original cover.They have a nice big fill plug. I highly recommend these if you want the best

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.