3/4" Heim Tie Rod Kit

This is just what the doctor ordered when you just jammed a rock with the stock 1/16" thick tie rod or a solid tie rod. These are 1.5" in diameter and .25" thick and can take a hit over and over again so do it right the first time with something serious from Ruffstuff! You will need to drill your arms to a 5/8" hole to use this kit.

You will receive:

• 1 - RH 3/4" X 3/4" Bore Heat Treated Chromoly Heims
• 1 - LH 3/4" X 3/4" Bore Heat Treated Chromoly Heims
• 1 - RH 3/4" Hex Head Tube Adapters (1" Tube ID)
• 1 - LH 3/4" Hex Head Tube Adapters (1" Tube ID)
• 1 - RH 3/4" Jam Nuts
• 1 - LH 3/4" Jam Nuts
• 4 - 3/4" To 5/8" Narrow Stainless Misalignment
• 1 - 1.5" X .25 X 54" DOM tube

This is a do it yourself style kit that requires welding by a competent person with the right equipment, don't skimp, do it right! You will need to check clearances with the steering at lock to see if you need to add any bends before you cut it down to clear diff covers, sway bar mounts, etc

Additional Products you may need to install this kit:

Click HERE for 90 degree steering stabilizer bracket	Click HERE for flat mount steering stabilizer bracket