Double Flex Front-Rear Lower Control Arms For Jeep TJ/XJ/MJ/LJ

Double Flex Front or Rear Lower Control Arms - TJ/XJ/MJ/LJ

These correct the many weaknesses in the factory arms with greater strength and performance. Where other companies use cheap canister type joints we use our tried and true Heat Treated Heim joints. Where others use .188" wall tubing(some even use .120 wall) we use .25" wall tubing. Must use adjustable upper arms with these longer lower arms

"Lets get this right out in the open, my math is not that great but I calculate these are at least 4 times stronger than stock factory control arms for the Jeep JK, TJ, LJ & XJ! The factory arms are weak, too short when adding lift and need replacement. I don't think you will bend ours and there are lots of advantages. These have 1.25" Heim joints for the lowers and 7/8' Heim uppers. The Heims allow for more than twice the travel (36 Degrees) of the factory bushings (~10 degrees). These are all Jig Built by Humans (Not Machines) here in Loomis California with steel made in Alabama or Chicago."

-Dan

• Designed to be used with 2.5"-4" lifts
• Comes Welded
• Adjustable Length
• Sold In Pairs

Kit Includes

• 2x.250 DOM Tube
• 4 - Heim 1.25" Assemblies With 9/16" Zinc Misalignment

Fits

• 1997 to 2006 Front and Rear Lower TJ Wrangler, Rubicon and Unlimited.
• 1984 to 2001 Front Lower XJ Cherokee
• 1986 to 1992 Front Lower MJ Comanche