Ruffstuff Front Panhard / Track Bar For Jeep JK

This JK track bar is well made and installed easily under my Jeep. Like the other product review, it seems to be a little longer than needed for the minimum 2.5 lift requirement (I have a 2.5 spring lift). I spun the jam nut all the way down the heim and all the way in the track bar, it's still about a 1/2" too long. I have no adjustment unless I get a taller lift. Also the zerk fitting is located on the bottom of the track bar and is only accessible if you remove your steering stabilizer if you are running one in the stock location. Still a great product for the money.

Just put this track bar on last weekend. The quality of the welds and the components are fantastic. There are a few tweaks that I would have done differently. The first is the track bar needs to be about an inch shorter. I have a 3-inch lift and the Heim is all the way in and the track bar still needs to be about shorter to put the axle even under the Jeep. The only other tweak is to put the zerk fitting on the other side of the track bar. So you can access it without removing the steering stabilizer. Overall I would purchase this again over competitors products. It's hard to beat the price point as long as you're willing to put your own paint on it.