DIY Universal Radius / Long Arm Kit

DIY Universal Radius / Long Arm Kit

This is an easy kit for making your own set of Radius Long arms. Keep in mind you could add something as simple as a Panhard Kit and either coil. buckets or coil-over brackets and you have an inexpensive and complete suspension setup.

The Lower tubes are 2" x .25" wall DOM and come cut at 38". For frame attachment a 1.25" Heat Treated Heim in our Chassis Link Bracket, which comes with 9/16" holes. However you can drill those out and use a larger bolt if necessary. The axle side connects using a 2-5/8" Bushed DOM Sleeve in either our 0 or 10 Degree 3" Axle Mount Link Tab.

The Uppers come with a 24" cut piece of 1.5" x .25" DOM and attach to the Lower Control arm with a 7/8" Heat treated Heim and 5/8" Misalignments. A 2-5/8" Bushed DOM Sleeve in our 10 Degree Adjustable Link Tower Bracket for attachment to the axle.

KIT INCLUDES:

• (2) 2" x .250 x 38" DOM
• (2) 1.5" x .250 x 24" DOM
• (2) Adjustable Axle Mount Link Towers(0 or 10 Degree) (Upper)
• (2) 3.0"Tube Radius Axle Mount (0 or 10 Degree) Link Bracket (Lower)
• (2) Radius Arm Brackets
• (2) Chassis Link Bracket with 9/16" Holes
• (2) 7/8" Heat treated Heims with 9/16" Narrow Misalignment Spacers
• (2) 1.25" Heat treated Heims with 9/16" Misalignment Spacers
• (4) Bushed DOM sleeves; 2-5/8" wide with 9/16" Inner Sleeve
• 1 - Bolt kit

Note

• Sold in pairs
• Comes unwelded