4-3/4"x2-3/4"x2-1/2" Bump Stop Pair

SKU: R1862 4-3/4"x2-3/4"x2-1/2" Bump Stop Pair

Click image to zoom

Description
Reviews

2.5" x 4.75" x 2.75" Bump Stop Pair

These medium bump stops are great for cushioning suspension up-travel, The can be mounted to the frame or axle side in any situation, and only need a semi-flat piece of metal as a contact surface to get the full effect.

They are not solid all the way through, allowing for softer compression unlike other bump stops that are so solid they hit almost as hard as metal-on-metal contact. These allow for sufficient cushion but still allow enough compression to not limit your flex-ability on up-travel. They mount with a 3/8" - 16 stud and come with a nylock nut to hold them securely

2.5" Tall x 4.75" wide x 2.75" deep
Sold in pairs

Write Review

Currently Viewing Reviews with a rating of 5. Click here to reset.

★★★★★ ★★★★★

5/5 Stars out of 1 Reviews

1 ★

2 ★

3 ★

4 ★

5 ★

Verified Buyer

Great bump stops

★ ★ ★ ★ ★ 5

Jonathan larson (Sacramento, CA, US) | July 26th, 2015

I installed these on my XJ, rear 14b with some 1.75" DOM .250 wall coming off the tube with a bump pad on top, about an inch taller than the leaf plates. welded up some 2x2" square to the frame and drilled and flush welded the nut into the 2x2 so I can just screw these in. pretty slick. these leave me with around 2.5" air gap unloaded which might not be enough and I Might end up ordering the 2.5" ones.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.