Solid 7075 Aluminum Drag Link For Jeep JK

Jeep Wrangler JK, Solid 7075 Aluminum Drag Link

Jeep JK Specific  Aluminum Drag Link Fits 2007-2018 Jeep JK . Only requires reaming of knuckle and pitman arm to accept the GM 1 ton taper. This kit Includes a 7075 aluminum drag link bar with machined flats to allow easy tightening, a heavy duty GM 1 ton Offset Tie Rod End at the knuckle and our GM 1 Ton High Angle Drag Link End at the pitman arm. Made from 1.5" OD solid 7075 Aluminum bar pre fit for the JK Axles. 7075 Aluminum is substantially stronger than 4130 Chromoly Steel on an equal weight basis and is a flexible material with a “Memory” meaning it will flex back to the original position, this makes for a Drag Link that will outperform the stock link while weighing less.

You will need to ream your knuckle's taper to accept the GM 1 ton TRE's Designed to be used in the stock location with up to 3.5" of lift. May require use of an adjustable pan hard

KIT INCLUDES:

• 1-7075 Aluminum Drag Link Bar
• 1-Offset Tie Rod
• 1-High Angle Drag Link End
• 1 RH - 7/8" Jam Nuts, 18TPI for Tie Rod Ends
• 1 LH - 7/8" Jam Nuts, 18TPI for Tie Rod Ends

Additional Products you may need when installing this kit: