Reamer for GM 1 Ton TRE's

Reamer for GM 1 Ton TRE's

This is the tool you need to ream out your knuckles to fit our GM 1 Ton TRE's. If you want to stay DOT approved and not upgrade to Heim Tie Rod's this is your tool. It will also work for our High Angle Drag Link Tapering needs, you just have to drill a little further.

• Cutting oil or WD-40 is always suggested to keep it cool and smooth.

7*/ 1.5" per foot Flute reamer designed for Chevy style heavy duty tie rod ends. Overall length is 6-1/2", flute length is 4-1/2", shank diameter is 1/2" with a square on the end. Can be used by hand with a tap wrench, in a drill press, or vertical mill with a 1/2" or larger drill chuck or collet. If not using by hand it is recommended to cut off the square end before chucking it up. This will distribute the clamping force down the entire length of the shank. If just the square portion is in contact of the chuck then it will shatter while using a drill.