Current Fullfilment Times: USPS Orders: 1-3 Business Days. UPS Orders: 5 Business Days.
Secure Checkout
SKU: R2126 DIY Custom Bumper Fabrication Package
This is a great starter kit we offer for building your rear swing out bumper. We see a lot of people building their bumpers the wrong way, when you use a swingout you must have a rest for the end or you will have an inevitable stress fracture. The swingout end must be supported when at rest, just a pad of steel that doesn't allow downward movement then situate the clamp to pull the arm even tighter against the rest to completey stop any upward movement. When following from behind you should not see any movement at all, if it moves it isn't resting on the pad or the clamp is not tight enough. You will save a few dollars by purchasing this kit instead of purchasing them separately.
| Part# | Description | Bolt Pattern Inches | Bolt Pattern MM | Hole Size in Plate |
| R2501 | Can-Am | 4 x 5.39" | 4 x 137 | 12mm |
| R2501 | Polaris | 4 x 6.14" | 4 x 156 | 12mm |
| R1214 | Jeep YJ, TJ, LJ, XJ, MJ, and ZJ | 5 x 4.5" | 5 x 114.3 | 1/2" |
| R1214 | Jeep JK, JL, JT, WJ, and WK | 5 x 5" | 5 x 127 | 1/2" |
| R1214 | Jeep CJ and pre 1973 Wagoneer | 5 x 5.5" | 5 x 139.7 | 1/2" |
| R2501 | Toyota Tundra/ Sequoia | 5 x 5.9" | 5 x 150 | 14mm |
| R2501 | Chevy Colorado/Canyon | 6 x 4.72" | 6 x 120 | 12mm |
| R2501 | 04 and newer Ford F-150 and Expedition | 6 x 5.31" | 6 x 135 | 14mm |
| R1214 | Standard Chevy / Toyota / Nissan 6 Lugs | 6 x 5.5" | 6 x 139.7 | 1/2" |
| R1214 | Ford, GM, and Dodge full size trucks and SUVs | 8 x 6.5" | 8 x 165.1 | 9/16" |
| R1214 | 99 and newer Ford Super Duty trucks | 8 x 6.69" | 8 x 170 | 9/16" |
| R2501 | Newer GM Full Size Metric Pattern | 8 x 7.09" | 8 x 180 | 14mm |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
