Heavy Duty Antiwrap/Traction Bar Kit

Heavy Duty Antiwrap/Traction Bar Kit

This is a heavier duty version of our Anti-wrap/Traction Bar Complete Kit. We upgraded the heim on the lower tube to a 1 1/4" rod end and moved the 7/8" rod end to the upper tube mount to our Radius Arm Bracket which now adds adjustability of the pinion angle. We still use the same beefy 3/8" traditional main plates. The tubing is all .250" wall, it will take the strain and impact. This Anti-wrap kit will not let you down.

The options in this kit are tube lengths (long or short wheelbase). This kit is a DIY kit and comes unwelded, fabrication is required

• 2-Main Plates for a 3" axle tube
• 3-Bushed DOM Sleeve (2 5/8" Wide)
• 2-1/4" Thick Tabs for Mounting Bushing to 1.75" OD Tube Crossmember
• 4-9/16x4.5" Bolts
• 1-9/16x3.5" Bolt
• 2-Shackles (4" from hole to hole)
• 1-Radius Arm Bracket
• 1-7/8"x7/8"" rod end w/ jam nut, tube adapter and narrow misalignment spacers
• 1-1.25" rod end w/ jam nut, tube adapter and 9/16 misalignment spacers
• 1-3' x 2" x .25" wall DOM tube (the lower)
• 1-3' x 1.5" x .25" wall DOM tube (the upper)