Adjustable Front Upper Control Arm For Jeep TJ/XJ/MJ/LJ/ZJ

SKU: R2389 Adjustable Front Upper Control Arm For Jeep TJ/XJ/MJ/LJ/ZJ

Click image to zoom

Description
Reviews

Adjustable Front Upper Control Arm For Jeep TJ/XJ/MJ/LJ/ZJ

Front Upper Control Arms are the ideal replacement for your Jeep factory control arms. Whether you're repairing or correcting your Wrangler's castor geometry after lifting, these front upper control arms will ensure a quality ride with more articulation. They're designed for 2.5-4 inches of suspension lift and are ready for a painless installation. The pair of arms come completely welded and utilizes your factory mounts!

"Lets get this right out in the open, my math is not that great but I calculate these are at least 4 times stronger than stock factory control arms for the Jeep JK, TJ, LJ & XJ! The factory arms are weak, too short when adding lift and need replacement. I don't think you will bend ours and there are lots of advantages. These have 1.25" Heim joints for the lowers and 7/8' Heim uppers. The Heims allow for more than twice the travel (36 Degrees) of the factory bushings (~10 degrees). These are all Jig Built by Humans (Not Machines) here in Loomis California with steel made in Alabama or Chicago."

-Dan

Note

The heim provided comes with spacers for a 1/2" bolt, drilling is required on your frame bracket is required and use of a 1/2" bolt is required
Adjustable Length
Kit comes fully welded!
Sold In Pairs

Kit Includes

(2) 1.5" x .250 wall DOM Tubing
(2) Reinforced OE style for end
(2) 7/8" Heim Kits w/ 1/2" Misalignment Spacers

Fits

1997 to 2006 Front Upper TJ Wrangler, Rubicon and Unlimited.
1984 to 2001 Front Upper XJ Cherokee
1986 to 1992 Front Upper MJ Comanche
1993 to 1998 Front Upper ZJ Grand Cherokee

Write Review

Currently Viewing Reviews with a rating of 5. Click here to reset.

★★★★★ ★★★★★

5/5 Stars out of 4 Reviews

1 ★

2 ★

3 ★

4 ★

5 ★

Super beefy

★ ★ ★ ★ ★ 5

Jacob Stuart (SC) | January 18th, 2022

I bent my stock control arms rock crawling, so I went with these and the welds and beef of these arms was very surprising. Very happy customer!

Heavy duty components

★ ★ ★ ★ ★ 5

Jed Grant (Virginia) | November 23rd, 2021

I went with Ruffstuff links and trackbars to piece together a lift and I wasn't disappointed. These links are all outstanding. I drilled these out to 7/16" (the stock TJ D44 rubber bushing with sleeves are pretty thick, could possibly get away with 3/8"). Would definitely recommend.

Strong, quality, adjustable

★ ★ ★ ★ ★ 5

@J.J._Jeep (Central Illinois) | June 10th, 2021

I bought these to go along with my RuffStuff LCAs in the front. They are solid and beefy. I've noticed significant improvement in my suspension range of motion since I've installed the set up front and am currently working to create more flex by replacing other components but I have to say the arms are not a limiting factor any more. The welds are great and they were easy to paint and install. I have been running them for over a year and the maintenance on them is minimal. I do pay attention to them and lube them occasionally but I live in a high rust area and run through a lot of mud so I do it mostly for peace of mind. I wouldn't hesitate at all to buy these and couple them with some RuffStuff LCAs single or double flex.

Verified Buyer

extremely beefy

★ ★ ★ ★ ★ 5

James Lewis (Glendale, AZ, US) | August 27th, 2019

These arms just got delivered and there is no doubt they will stand up to anything you can throw at them. Can't wait to install them.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.