Make it easy to disconnect your sway and add more suspension travel. The pin is 1/2" diameter and enough room for a 1/2" Heim. These are made in the USA to our design.
Typical sway bar arms are 13/16" (around .812") thick, so the threaded portion of these is not quite long enough to engage with the nylon in the crown of a nylon locknut. Also, these are not fine thread, as is shown in the photos.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
