Front Track Bar Crossover Bar Kit For Jeep XJ

Front Track Bar Crossover Bar Kit For Jeep XJ

We designed this kit to be the ultimate solution for keeping your XJ's front end from falling apart. We made sure to include a Crossover Bar that reinforces the frame side bracket, so you won't have to worry about it ripping off and taking your unibody with it. With three mounting points, your XJ will stay rock-solid whether you're on or off-road, and it works with or without our frame stiffeners.

Installation is a breeze; it's entirely bolt-on. However, we offer an axle mount bracket to replace the weak OEM one that will require welding. The heims in our kit are adjustable and replaceable, giving you the freedom to fine-tune your suspension. You can adjust the axle location for lift heights between 1 and 5 inches, perfect for using 3-inch coils.

But here's what really sets us apart: Our brackets are designed to better fit your frame and made from 3/16" steel for extra reinforcement. While our Crossover Bar and Track Bar are made from 1.25" X .120" wall and 1.5" X .25" wall DOM tube respectively. To put it plainly, this kit is beefy.

Kit Includes

• Driver Side Track Bar/Crossover Bar Bracket
• Passenger Side Crossover Bar Bracket
• Track Bar
• Crossover Bar
• 1x LH 7/8" x 7/8" Rod End
• 1x RH 7/8" x 7/8" Rod End
• 1x LH 5/8" x 5/8" Rod End
• 1x RH 7/8" x 5/8" Rod End
• All Necessary Hardware (Drilling of factory axle bracket to 1/2" is required unless you choose to include and weld in our replacement bracket which is highly recommended)
• Optional Axle Mount Track Bar Bracket