Odyssey Single Battery Box Latch Style
Our battery boxes are designed with the fabricator in mind. This box is made with very tight tolerances so the battery will not move around and the top plate is also cut in a shape to fit the battery. They have no predetermined location holes cut in them so you can use them as best suits your project without having to work around someone else's idea of how it should be done! This latch design was made specifically to give you even more freedom on where to mount your battery box. In many cases you may need to mount your battery box so that it's tucked away and removing all 4 bolts on top can be a pain or even impossible without removing whatever is blocking it. Now you can mount it with the latch side tucked away anywhere. Just undo the 2 bolts, slide out the latch and the top comes right off!
- Designed for Odyssey Group 34/78 PC1500DT
- Battery box inside dimensions: 10 3/16"(L) x 6 3/4"(W) x 7"(H)
- These measurements are different from the dimensions listed on Odyssey's website. Odyssey includes the terminals and battery cap dimensions which sit above our boxes sides/ hold down.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
