Adjustable Front Upper Control Arm For Jeep TJ/XJ/MJ/LJ/ZJ

Front Upper Control Arms are the ideal replacement for your Jeep factory control arms. Whether you're repairing or correcting your Wrangler's castor geometry after lifting, these front upper control arms will ensure a quality ride with more articulation. They're designed for 2.5-4 inches of suspension lift and are ready for a painless installation. The pair of arms come completely welded and utilizes your factory mounts!

"Lets get this right out in the open, my math is not that great but I calculate these are at least 4 times stronger than stock factory control arms for the Jeep JK, TJ, LJ & XJ! The factory arms are weak, too short when adding lift and need replacement. I don't think you will bend ours and there are lots of advantages. These have 1.25" Heim joints for the lowers and 7/8' Heim uppers. The Heims allow for more than twice the travel (36 Degrees) of the factory bushings (~10 degrees). These are all Jig Built by Humans (Not Machines) here in Loomis California with steel made in Alabama or Chicago."

-Dan

Note

The heim provided comes with spacers for a 1/2" bolt, drilling is required on your frame bracket is required and use of a 1/2" bolt is required
Adjustable Length
Kit comes fully welded!
Sold In Pairs

Kit Includes

(2) 1.5" x .250 wall DOM Tubing
(2) Reinforced OE style for end
(2) 7/8" Heim Kits w/ 1/2" Misalignment Spacers

Fits

1997 to 2006 Front Upper TJ Wrangler, Rubicon and Unlimited.
1984 to 2001 Front Upper XJ Cherokee
1986 to 1992 Front Upper MJ Comanche
1993 to 1998 Front Upper ZJ Grand Cherokee

Jeep Deals