Dana 60 High Steer Arm Pair, Springless

SKU: R2148 Dana 60 High Steer Arm Pair, Springless

Click image to zoom

Description
Reviews

Dana 60 High Steer Arm Pair, Springless

Dana 60 high-steer arms designed to work both with factory 4 stud knuckles as well as many aftermarket knuckles that feature the 5th stud. Also a springless system that replaces the stock king-pin retention spring with a threaded stud and heavy duty washer to pre-load the king-pin bushing. There is a grease fitting on the top of the pre-load stud that allows you to lubricate the bushing without any disassembly.

The arms come with tie-rod and drag link holes tapered for a GM 1 ton tie rod ends, but there is plenty of meat to drill out to 3/4" to run a Heim joint steering system as well.

For Offroad Use Only

The shoulder on some factory studs are too large for these arms. The arms are drilled to .502"

Write Review

No Reviews Yet!

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.