Tie Rod Offset, ES23434 TRE

SKU: R1326 Tie Rod End Offset, ES23434 TRE

Click image to zoom

Offset Tie Rod End

These Tie Rod Ends (TRE's) are offset by 1 inch, so in a cross over steering setup you can move to an oversize tie rod without hitting the cover at full lock. They are the standard GM 1 ton taper with a 7/8"-18 TPI threaded shank. These are sold as Lefts & Rights and we also sell them as a complete kit with 1 1/2" X .25" wall DOM tubing. Offset ends should only be used on straight linkage, not recommended for tubing with bends

Note

IMPORTANT: Tube adapters not included
Driver Side = Right Hand Thread (When mounted under the knuckle, Passenger side for over the knuckle)
Passenger Side = Left Hand Thread (When mounted under the knuckle, Driver side for over the knuckle)

Additional Products you may need when installing this kit:

7/8" X 18TPI RH TUBE ADAPTER 1" ID HEX

7/8" X 18TPI LH TUBE ADAPTER 1" ID HEX

Flat Mount Steering Stabilizer Bracket

90 Degree Steering Stabilizer Bracket

High Angle Tapered Knuckle Inserts

Tapered Knuckle Inserts

Write Review

Currently Viewing Reviews with a rating of 5. Click here to reset.

★★★★★ ★★★★★

5/5 Stars out of 7 Reviews

1 ★

2 ★

3 ★

4 ★

5 ★

Pages 1 2

Great fit

★ ★ ★ ★ ★ 5

Michael S (TX) | November 17th, 2023

I was having a hard time finding the offset ends that would fit my parts. I bought this for Tie Rod ends and Drag Link ends worked great. Also awesome customer service. Would definitely use again.

Offset tie rod ends

★ ★ ★ ★ ★ 5

GREG LEBLOND (CT) | April 11th, 2021

These have always worked good for me. This time is no exception. I hit 2 deer and it just bent the threads on the old one. Joint was still tight and no actual failures. I will continue to use these, since they work very well and are strong

Verified Buyer

Durable

★ ★ ★ ★ ★ 5

mike fry (carlisle, PA, US) | March 24th, 2017

I've been running a set of the offset TRE's for over four years now. I wheel at least once a month. After a recent steering issue, I assumed it was time to replace the TREs. After I removed them I found that they were still in excellent shape. Tight, free moving and no slop. My Steering issue was another problem. I didn't expect them to have taken the abuse I've given them. Great item for the money.

Verified Buyer

Great TieRod Ends - Easy Purchase

★ ★ ★ ★ ★ 5

Jeff Watson (Plano, TX, US) | July 17th, 2016

These are the second set of tierod ends I've purchased. Great product, easy online ordering, and prompt delivery. Items as advertised. My go-to place for ends and parts.

Verified Buyer

Great Product

★ ★ ★ ★ ★ 5

Roger Hobbs (Ledyard, CT, US) | April 11th, 2016

I installed the RuffStuff y-link 1-ton steering in my SOA YJ with high steer. Due to clearances the drag link was against the tie rod and wouldn't allow the tie rod to fully seat. I used this offset tie rod to replace the tie rod at the Y and it did exactly what I wanted it to. Great product that allowed me to continue to use the current set up.

RuffStuff Offset All Metal TRE

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.