TRE, High Angle Drag Link, ES2027

TRE, High Angle Drag Link, ES2027 available in left hand or right hand thread

This is a GM 1 Ton Tie Rod End made specifically for use as a Draglink. The Draglink TRE will travel farther than a Standard TRE. The Draglink TRE has a slightly larger taper than a Standard TRE, .795" vs .749" so the taper must be deeper for the Draglink.

Note

• Measures ~ 6 1/2" from center of zerk to end of threads
• Jam nut included

Additional Products you may need when installing this kit:

7/8" X 18TPI RH TUBE ADAPTER 1" ID HEX

7/8" X 18TPI LH TUBE ADAPTER 1" ID HEX

Flat Mount Steering Stabilizer Bracket

90 Degree Steering Stabilizer Bracket

High Angle Tapered Knuckle Inserts

Tapered Knuckle Inserts